Infrastructure & Manufacturing Facilities

   

• Pressure Range: Full Vacuum up to positive pressure at 300Bar.
• Temperature Range: F-165ºC to 1400ºC
• Movement Range: Any of movement subject to service condition and overall length(OAL)
• Vibration: Low to high frequency and low amplitude.
• Forming Process: Hydro Forming 50NB to 38”NB
• Semi Automatic Punch Forming – 150NB to 300”NB
• Welding Process: Tig welding machine (GTAW)
• Stick welding machine (MMAW)
• Mig welding machine (MMGW)
• Automatic longitudinal seam welding machine (LSWM)
• Material: Austenitic Grade (SA 240, GR 304, 304L, 304H, 310S, 310H, 316, 316L, 316H, 316Ti, 321, 904L & 309S)
• Duplex (SAF 2205, UNS S31803, 253MA UNS S30815 ect..)
• Nickel Alloy (Inconel / Incolloy-600, 601, 625(UNS N06600, 660, 6625) 800, 800HT, 825 - N0880, 8810.8811, 8825)
• Nickel-Copper Alloy (Monel) – UNS N04400
• Titanium GR 1
• Carbon Steel / Mild Steel
• Testing : Non Destructive Testing
• Radiography Test Examination
• Liquid Penetrant Test Examination
• Magnetic Particle Test Examination
• Ultrasonic Test Examination
• Halogen Leak Test Examination
• Mass Spectrometer Test Examination
• Air Jet Leak Test Examination
• Pressure Test Examination (Hydro or Pneumatic Test)
• Destructive Testing
• Fatigue Cyclic Life Test
• Squirm Test
• Meridional Yield Rupture Test
• Pressure Vessel and General Fabrication
• All the pressure vessel design and manufacturing is as per ASME Code.
• Maximum Capacity is 16mmThk, 3000mmDiameter, 25000mmLength.

Our Infrastructure